Maretron Pressure Transducer 0 to 50 PSI

(No reviews yet)

$163.05

Maretron

SKU:

MP-64725

UPC:

873804002927

Dimension:

5.00 (cm) × 1.00 (cm) × 6.00 (cm) (W × H × D)

This item is temporarily out of stock.

Current Stock:

Pressure Transducer 0 to 50 PSI

All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.

Warning WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.