Permatex High Strength Threadlocker RED Gel Squeeze

(No reviews yet)

$28.99

Permatex

SKU:

MP-84610

UPC:

686226270054

Dimension:

4.00 (cm) × 1.00 (cm) × 7.00 (cm) (W × H × D)

Shipping Time:

This product typically ships out in 3 - 4 days.

Transit Time:

Transit Time for this product is around 2 - 4 days.

FREE SHIPPING
CANADAWIDE

IT'S ALWAYS HOLIDAY SEASON
UP TO 90 DAYS RETURN FOR IBS CLUB CUSTOMERS

Current Stock:

Quantity:

Adding to cart… The item has been added

High Strength Threadlocker RED Gel Squeeze

OEM specified. Gel formula provides “liquid-reliability” without drips, globs, mess or waste. Available in three convenient sizes, the GEL TWIST™ pin-point applicator, the GEL SQUEEZE™ applicator, or the single-use pouch puts the Threadlocker right where you want it…on the part! High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loosening. May require heat or special tools for removal. Conforms to ASTM D5363 AN0221 (Mil-S-46163A, Type I, Grade K).

Applications:

Automobile - Suggested Applications: Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts; also ideal for vertical applications
Heavy Duty - Suggested Applications: Cap screws and mounting studs on differentials

Directions:

Parts should be clean and oil free.

Remove protective cap.
Turn dial to expose 1/8″ to 1/4″ of material beyond tip.
Apply threadlocker to leading edge of male fitting,covering 5 to 6 threads. Avoid direct contact of tip to metal surface*.
Assemble parts and tighten to recommended torque.
Replace protective cap.*If contact occurs, expose 1/16” of material and wipe off with a clean towel.Temperature range: -65°F to 300°F (-54°C to 150°C).Refer to Technical Data Sheet for complete information.

NOTE: Permatex® Threadlocker Gel should not be used on plastic fittings. Do not use on food contact surfaces.Avoid food contamination during use and storage.